Molgoc’s projector lamp replacement for Epson projectors is a cost-effective invest for not only it provides the same output as original bulb, but also it is compatible with almost all Epson projector modles.
Molgoc’s ELPLP88 bulb for Epson projector is durable for long lifespan of over 3,000 hours. In the meanwhile it can deliver excellent projection brightness and picture quality without dark spots or flickers. Perfect for any projection of home theater, business presentation, classroom, and so on.
This lamp replacement works seamlessly with various Epson interactive projectors: EB-97H, EB-945H, EB-955WH, EB-965H, EB-97H, EB-98H, EB-S04, EB-S130, EB-S27, EB-S29, EB-S300, EB-S31, EB-U04, EB-U130, EB-U32, EB-W04, EB-W130, EB-W29, EB-W31, EB-W32, EB-W420, EB-X04, EB-X130, EB-X27, EB-X29, EB-X300, EB-X31, EB-X350, EB-X36, EH-TW5210, EH-TW5300, EH-TW5350, EH-TW5350S, EX3240, EX5240, EX5250, EX7240, EX9200, H682.
Replacing the original Espon lamp with this ELPLP88 is not difficult. Just follow below steps and you can enjoy the favorable projection again.
1. Turn off the projector and unplug the power cord.
2. Allow the projector to cool for at least one hour before replacing the EX9200 pro lamp.
3. Loosen the lamp cover screws. Then remove the bulb cover.
4. Loosen the two screws that secure the ELPLP88 V13H010L88 lamp in place.
5. Gently remove the old one.
6. Gently insert the new lamp. Then tighten the screws.
7. Replace the lamp cover and tighten the screws.
